Home
Product Directory
Industrial Equipment & Components
Refrigeration Equipment
Industrial Chiller
Air Cooled Water Chiller and Heat Pump With Axial Fans, Scroll Compressors
| Min. Order: | 1 Set |
|---|---|
| Payment Terms: | L/C, T/T |
Similar Items
Loading...
You May Like
Loading...
Product Description
Company Info
Product Description
Air Cooled Water Chiller and Heat Pump with Axial Fans, Scroll Compressors, Water Pump and Storage Tank
H(R)AF 05÷ 30
Cooling capacity: 5.8÷ 26.3 kW
Heating capacity: 6.3÷ 31.2 kW
STRUCTURE
Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
HERMETIC COMPRESSORS
Single phase (mod. 05÷ 10) compressors, 3-phase scroll compressor (mod. 12.5÷ 30), with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
Models 7÷ 10 are available also with 3-phase scroll compressor and mod. 12.5 with single phase scroll compressor.
AXIAL FANS
External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
EVAPORATOR
High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material.
CONDENSER
Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, protected with flexible plastic grill.
REFRIGERANT CIRCUIT
Copper tube connection with charge valve, filter drier (filter for 05÷ 8.5), gas-liquid separator, thermostatic expansion valve (expansion capillary tubes for mod. 05÷ 8.5), low pressure switch with automatic reset, high pressure switch with manual reset.
The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
HYDRONIC CIRCUIT
Built with air vent valve, water drain connection, water circuit safety valve, water pump, male-threaded hydraulic connectors and inertial water storage tank.
ELECTRIC PANEL
Consists of:
Z Compressor contactor;
Z Water pump contactor;
Z Compressor protection breaker;
Z Water pump protection breaker
Z Fan motor protection breaker;
Z Control circuit protection breaker;
Z Phase sequence relay (only for 3-phase power supplied units);
Z Fan speed regulator (Optional);
Z Programmable microprocessor controller;
H(R)AF 05÷ 30
Cooling capacity: 5.8÷ 26.3 kW
Heating capacity: 6.3÷ 31.2 kW
STRUCTURE
Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents.
HERMETIC COMPRESSORS
Single phase (mod. 05÷ 10) compressors, 3-phase scroll compressor (mod. 12.5÷ 30), with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators.
Models 7÷ 10 are available also with 3-phase scroll compressor and mod. 12.5 with single phase scroll compressor.
AXIAL FANS
External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille.
EVAPORATOR
High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material.
CONDENSER
Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, protected with flexible plastic grill.
REFRIGERANT CIRCUIT
Copper tube connection with charge valve, filter drier (filter for 05÷ 8.5), gas-liquid separator, thermostatic expansion valve (expansion capillary tubes for mod. 05÷ 8.5), low pressure switch with automatic reset, high pressure switch with manual reset.
The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve.
HYDRONIC CIRCUIT
Built with air vent valve, water drain connection, water circuit safety valve, water pump, male-threaded hydraulic connectors and inertial water storage tank.
ELECTRIC PANEL
Consists of:
Z Compressor contactor;
Z Water pump contactor;
Z Compressor protection breaker;
Z Water pump protection breaker
Z Fan motor protection breaker;
Z Control circuit protection breaker;
Z Phase sequence relay (only for 3-phase power supplied units);
Z Fan speed regulator (Optional);
Z Programmable microprocessor controller;
Address:
Jinghuan Road, Dezhou, Shandong, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 14001
Company Introduction:
Bright established in 1986 and is one of the most professional and the largest air conditioning manufacturers with high technology and wide products in China.
Presently, the new industrial park with land coverage of a total area of 600, 000 square meters and workshop area of 200, 000 square meters. There are over 20 production lines in 7 workshops and over 2000 employees, including 70 engineers in R&D and customer supports departments
In the spirit of "quality is the determinative of the company", Bright commits providing the first rate product to the customers. There is a national recognized enthalpy testing center for simulating, analysis. At end of every production line, there is an on-line testing room to test every single product. Bright′s every single product is guaranteed.
Bright head office and production base are located Dezhou, Shandong, China with over 30 branch offices in China and now two branch offices in Unite States and Italy.
Our major products are Air-cooled water chiller and heat pump, Water-cooled water chiller, Invert chiller, Light chiller, Hydraulic fan coil unit, Ground source heat pump, Ducted split unit, BRV inverter multi-split unit, Air-cooled condensing unit, Rooftop package unit, Cooling tower and Air handling unit for commercial and residential applications
Up to now, Bright products have been sold to U. S. A, Italy, Australia, Israel, Greece, Spanish, Pakistan, etc. In the May 2004, Bright became the central air conditioning supplier of Athens Olympic. Bright is on the way of becoming recognized brand in the international market.
Bright welcomes friends from all circles joining us as OEM partners or distributing agents.
Presently, the new industrial park with land coverage of a total area of 600, 000 square meters and workshop area of 200, 000 square meters. There are over 20 production lines in 7 workshops and over 2000 employees, including 70 engineers in R&D and customer supports departments
In the spirit of "quality is the determinative of the company", Bright commits providing the first rate product to the customers. There is a national recognized enthalpy testing center for simulating, analysis. At end of every production line, there is an on-line testing room to test every single product. Bright′s every single product is guaranteed.
Bright head office and production base are located Dezhou, Shandong, China with over 30 branch offices in China and now two branch offices in Unite States and Italy.
Our major products are Air-cooled water chiller and heat pump, Water-cooled water chiller, Invert chiller, Light chiller, Hydraulic fan coil unit, Ground source heat pump, Ducted split unit, BRV inverter multi-split unit, Air-cooled condensing unit, Rooftop package unit, Cooling tower and Air handling unit for commercial and residential applications
Up to now, Bright products have been sold to U. S. A, Italy, Australia, Israel, Greece, Spanish, Pakistan, etc. In the May 2004, Bright became the central air conditioning supplier of Athens Olympic. Bright is on the way of becoming recognized brand in the international market.
Bright welcomes friends from all circles joining us as OEM partners or distributing agents.
){kind=link}